Ibarski put 31, Nevade, 32300 G.Milanovac, Srbija
Ibarski put 31, Nevade, 32300 G.Milanovac, Srbija
Compliance, durability, and brand on a single label.
Dish soap next to fabric softener, all-purpose cleaner next to glass cleaner: on a supermarket shelf, a shopper decides in a few seconds, so the label has to stand out immediately through color and contrast. At the same time, every product sold to the general public carries a legal requirement: GHS pictograms, a tactile warning triangle, and a complete CLP declaration. The label has to withstand direct contact with the product it identifies and wet hands in the kitchen, and the Frankini DMR presses the triangle directly into the label during printing.
Regulatory compliance, resistance to the product itself, water resistance in use, and brand recognition on a crowded shelf.
The Frankini DMR forms the raised triangle directly on the printed label. Every label on the roll already has the triangle. There's no separate sticker, no second applicator, so there's a lower risk of a bottle reaching store shelves without the warning. One roll, full compliance.
When every product shares the same bottle size and label dimensions, only the plate set changes between products. Twenty-five labels in a single batch order, six presses running in parallel, a lower unit price because the setup cost is shared. The full set arrives in the same week on one pallet.
For products containing chlorine or acid, we use PET film with a RESIN coating and a protective laminate. PET is chemically inert and doesn't react with active ingredients. For milder products (dish soap, fabric softener), PP with a UV coating is sufficient. GHS pictograms stay legible for the product's full shelf life.
Questions about the tactile warning triangle, chemical resistance, large product ranges, and the ordering process.
If the product is classified as an irritant, corrosive, or otherwise hazardous under EU CLP and is sold to the general public, the tactile triangle is required. Send us the safety data sheet (SDS) with the CLP classification, and we'll check whether the triangle is needed. Most general-sale cleaning products require the triangle.
No. The Frankini DMR forms the raised triangle directly on the printed label. Every label on the roll already has the triangle. There's no separate application step, no risk of it being missed. One roll, full compliance with ISO 11683.
Yes. PET film with a RESIN coating and lamination. Chemically inert, and the laminate protects the print. GHS pictograms and H/P statements stay legible for the full shelf life.
Yes. PP film with a UV coating doesn't absorb water. For bathroom use (constant contact with water and steam) we add lamination. The print stays legible and the colors don't fade.
Yes. A batch order for products with the same dimensions and material, where only the plates change. Six presses running in parallel, the full set arrives in the same week. A lower unit price because the setup cost is shared.
Yes. Your settings are saved, and a reprint takes 3 to 5 business days with no new setup. Quality stays consistent because we use the same parameters as before.
Yes. Same material, same MPS presses, same Pantone color profiles. Servo register control and saved color profiles keep the brand color identical across every product. Star Proof for the first product, then the rest run from the same profile.
A multilayer label with an added layer, or an open-close construction for two languages. Your brand and GHS pictograms on the outer layer, H/P statements, the UFI code, and instructions in an added language underneath, with the tactile triangle pressed directly into the label. For markets with similar regulatory requirements.
Standard printed labels with the triangle, 7 to 10 business days. Batch orders for a full product range, 7 to 10 business days. Reprints, 3 to 5 business days. Multilayer labels with the triangle, 10 to 14 business days. Six presses provide the capacity.
The CLP classification with the SDS, packaging type (bottle, trigger sprayer, canister), label dimensions, number of products in the range, whether the triangle is required, how many markets and languages, print run per product, and your deadline. You'll get a quote within 24 hours.
Send us the SDS with your CLP classification and tell us how many products are in your range. We'll check whether the triangle is required, choose a material resistant to your product, and keep the brand look consistent across the whole range. A full set of labels for 25 products in the same week.
